14 Foot Rectangular Flag Banner

Rectangular Flag Banners, which are also called flying banners, beach flags, or advertising flags are a popular form of outdoor advertising, although they are used indoors at trade shows and events. Teardrop banners are often used in front of businesses and at outdoor venues for sporting events, festivals, and fairs. The stand itself consists of a multi section aluminum pole with a horizontal aluminum pole that connects to the top of the vertical pole to support the banner along the top side. The assembled pole fits into a reinforced pocket on the side and top of the flag to hold it flat. The included bungee cord is tied to a mounting hook on the bottom pole section and fastened to the grommet in the bottom of the reinforced pocket on the banner to ensure the banner stays in place on the pole.

The rectangular flag is available in 4 different sizes and there are multiple base options available, including a ground spike, X base, and water base that is a hollow base that can be filled with water for extra stability on hard surfaces. The rectangular flag banner pole fits over a spike on each base that allows the flag to rotate in the wind, and the ground spike and X base include ball bearings in the spike section that allow it to turn with minimal resistance. The rotation of the banner in the wind helps to reduce the wind load on the banner stand so that it can be safely used in up to 25 mph winds when using the ground spike or water base. The X base option includes ground stakes that can be used if placing on a soft surface and a water bag for additional stability when used on a hard surface, but it's not needed when used indoors or in less windy conditions. Because the size and weight of the banner, and the wind conditions will all effect the stability of the display with the X base on a hard surface, be sure to monitor the stand closely in windy conditions and add additional weight or take the stand down if the stability is in doubt to prevent it from blowing over and causing injuries. Even with the spike or water base option, if winds are blowing or gusting over 25mph, taking down the flags will help keep them from getting damaged.

Printed using dye sublimation on lightweight polyester fabric, these flags can be ordered single or double sided. The single sided version can still be viewed from both sides since the printing shows through to the back side, but any type or logos will be reversed on the back. The double sided version has two prints sewn back to back with a blockout layer in between to prevent any show through from one side to the other. This allows any text or logos to read correctly from both sides. The dye sublimation printing process produces vibrant color that becomes part of the fabric so it can't be scratched or washed off, but the down side is that dye inks do not have good fade resistance and have a prorated 3 month warranty against fading. If they are not left in the sun and weather full time, they will last longer, so where possible, we recommend taking the banners down when not in use to prolong their life.

NOTE: Outdoor banner stands that have a water filled base can freeze in very cold weather and damage the base, so antifreeze can be added to the water to prevent this.

The Rectangular Flag Banner stand comes with a heavy canvas travel bag. The 14' Rectangular Flag Banner holds a 27.56" x 129.91" fabric banner.

Recommended Accessories

Extra bases and replacement banners can all be found in the Related Products tab.